The use of H-beams is very wide and relatively popular. Therefore, the production of H-beams is the focus in many steel manufacturers. H-beams have their own set of methods, but there are many details to pay attention to during the production process. These details are often related to With the quality of H-beams, the following editors will explain to you.
The H-beam production line is based on the difference in the accuracy of the H-beam production line (removing invasive impurity particles). It adopts thick H-beam production lines, ordinary H-beam production lines, thin H-beam production lines and four fine H-beams. Line device, the difference can be filtered to more than 100 microns, 10 to 100 microns, 5 to 10 microns impurities, 1 to 5 microns clear. Note: When selecting an oil filter, the following points should be considered:
The accuracy of the H-beam production line should meet the savings requirements.
Sufficient flow capacity over a longer period of time. The filter element is sturdy enough that the H-beam will not be damaged by hydraulic use. The filter element has excellent corrosion resistance and can be used for a long time under temperature conditions. The filter element is easy to clean or change.
Therefore, the filter should be selected according to the technical requirements of the hydraulic system and the requirements of the accuracy, flow capacity, professional pressure, oil viscosity, and professional temperature of the H-beam production line.
The above are the issues that need attention in the production of H-beams. You need to understand them well. As the saying goes, the details determine success or failure, especially the production of steel is the key. We must pay more attention so that we can better grasp the H-beams. the quality of.
