Larson steel sheet pile cofferdam is the most commonly used type of sheet pile cofferdam. Larson steel sheet pile is a type of steel with a lock. Its section has a straight plate shape, a groove shape and a Z shape. It has various sizes and interlocking forms.
For the storage of Larson steel sheet piles, the first is the choice of storage location. As far as the site is concerned, it is necessary to choose a place that will not occur in parallel due to heavy pressure. A flat and solid site should be selected. This is to avoid steel plates. The pile is deformed due to its own weight. Second, it is easier to transport the steel sheet pile to the construction site when it is convenient to use.
So what issues should you pay attention to when storing Larson steel sheet piles:
1. When stacking, it is necessary to consider the future construction, and it is necessary to appropriately determine the order, location, direction and plane layout of the steel sheet piles. The first part is placed on the outermost side, and the later part can be placed inside, so that it can be easily transported outside when used.
2. Different types of steel sheet piles should be placed separately, not stacked randomly, classified according to different specifications, lengths, etc., and marked in the place where they are stacked, so that you can easily find the ones you want to use during use. Sheet pile.
3. Steel sheet piles should be stacked in layers. Generally, the number of each layer should not exceed five. In addition, sleepers should be placed between each layer. The distance between sleepers is generally 3 to 4 meters. The sleepers of the layer should be on the same vertical line, and the total height of the sleepers should generally not exceed two meters.
The above are the matters needing attention when storing Larson steel sheet piles. If you need further information, please consult our online customer service.
