Although the installation method of the disc buckle scaffold is simple, it cannot be ignored. Regardless of the type of scaffolding, the materials and processing quality of the scaffolding must meet the requirements, and the use of unqualified materials for the scaffolding is prohibited to prevent accidents. For dangerous and special racks such as hanging, picking, hanging, socket, stacking, etc., they must also be designed and approved, and separate safety technical measures must be prepared before they can be erected.
The use of disc-type scaffolding facilitates the construction of modern buildings. In order to ensure the safety of the construction process, there are some things that need our attention in the process of using disc-type scaffolding. In the early stage of construction, a special design and construction plan for the support system should be prepared and positioned by the general contractor to allow the support system to be horizontal and vertical to ensure the setting of the rear scissor braces and straight ladder connecting rods to ensure their overall stability and Anti-overturning.
Installation method of disc buckle scaffolding:
When a double-row outer scaffold is set up using a disc-type scaffold, the height is not greater than 24m, and when it is greater than 24m, additional design calculations must be performed. The user can choose the frame geometry according to the requirements of use. The distance between adjacent horizontal poles should be 2m, and the vertical distance of vertical poles should be 1.5m or 1.8m. The system can be adapted to various structural buildings. It consists of only three types of components: vertical rods, horizontal rods and stay rods. The vertical rods, cross rods and stay rods are all made in the factory.
The above is all about the installation method of disc buckle scaffolding introduced by Yanxin Senyu Xiaobian, I hope it will be helpful to everyone!
