I believe many friends have such confusion. I-beams are prone to rust problems after long storage. Then today, the I-beam manufacturer Yanxin Senyu brought you the derusting method of I-beam. I hope that through our introduction, everyone will have a better understanding of the I-beam derusting method.
I-beam is a kind of commonly used steel. It will be rust-proof during processing. However, if we do not pay attention when it is stored for a long time or when it is stored or used, rust may still appear. As an I-beam Manufacturers, how do we carry out preventive maintenance?
I-beam manufacturers remind you that because I-beam is often exposed to the air before use, after a long time, the steel will undergo a series of chemical reactions with oxygen and moisture in the air to produce rust. Corroded. However, because the rust will affect the use of I-beams, the gap between the I-beams will appear, the location of materials cannot be accurately placed, the speed of the project will be delayed, and the project will even collapse. Therefore, before each use of I-beam, it is necessary to remove rust, remove small rust spots to avoid corrosion, and affect the use effect. This requires the purchase of more efficient rust removers, which try to solve the surface oxidation problem. In addition, when using I-beams, they should be placed in a dry environment as much as possible to prevent rust.
Therefore, in order to better prevent I-beam rust, I-beam manufacturers usually try not to expose it to the air during storage, and store it in a dry place. In addition, if there is any rust phenomenon before use, it is recommended to remove the rust I-beam first. The rust removal method of I-beam avoids the use of small rust spots to expand into large rust spots after use.
