Steel pipe fastener manufacturers tell you that the commonly used steel pipe fasteners in China are made of cast iron, and their mechanical properties should be in accordance with "Steel Pipe Scaffolding Fasteners" (GB15831-2006). There are three types of fasteners: right-angle fasteners, butt fasteners, and rotary fasteners.
Steel pipe fastener manufacturers usually use woven bags to pack 25 pieces. Each weight should be 1.1KG (including bolts and nuts). In general, the antirust treatment is carried out in the form of a red antirust paint.
Steel pipe fasteners are usually used together with rack pipes. The ratio of production and procurement of fastener products is 8: 1: 1. That is to say, the ratio is 80% at right angles, 10% at docking, and 10% rotation.
Steel pipe fastener manufacturers remind you: pay special attention to rust prevention in the rainy season and summer
Be careful when using and installing, do not allow strong punching, do not directly hit the building fasteners with a hammer, and do not allow pressure to be transmitted through rolling elements.
Use appropriate and accurate installation tools. Use special tools as much as possible, and try to avoid using cloth and short fibers. The real meaning now, however, whether in laboratory tests or in actual use, it can be clearly seen that under the same working conditions, the appearance of the same rotating building fasteners, the actual life is very different.
Keep the steel pipe fastener and its surroundings clean Even if tiny dust invisible to the naked eye enters the building fastener, it will increase the wear, vibration and noise of the steel pipe fastener.
The above are the related matters that the steel pipe fastener manufacturers need to pay attention to when they are introduced to you. I hope it can help you!
