Everyone will use mobile scaffolding when decorating or building real estate. Mobile scaffolding is widely used as a type of scaffolding. How to use mobile scaffolding? The mobile scaffolding needs to pay attention to the use process, then Yan Xinsen domain editor will analyze with you the mobile scaffolding use specifications and instructions.
1. The clear distance between the mobile scaffolding pole and the wall should not be greater than 150mm. The assembly of the upper and lower gantry frames must be provided with connecting rods and locking arms, and both the inner and outer sides should be provided with cross-supports and locked with the locking pins on the mast pole prison.
2. The installation of mobile scaffolding shall extend from one end to the other end, and the installation direction shall be changed layer by layer. The cross support, horizontal frame or scaffolding should be set up immediately following the installation of the mast; the pin arms and hooks connecting the mast and accessories must be locked.
3. A horizontal rack must be set on the top of the top frame of the mobile scaffold, on the wall, and the shelter. When the height of the mast is less than 45m, the horizontal frame should be set at least in two steps along the height of the scaffold. When the height of the mast is greater than 45m, the level should be set at each step. No matter how high the scaffold is, it should be at the corner of the scaffold , End and discontinuity within a span of each step.
4. The horizontal frame can be replaced by hanging scaffolding or horizontal reinforcement rods on both sides of the door frame, which should be set continuously in its setting layer; when the internal cross support of the scaffold is temporarily removed partially due to construction needs, it should be above and below it Set the horizontal frame.
5. When the height of the mobile scaffold exceeds 20m, a continuous horizontal reinforcement bar should be set every 4 steps on the outside of the door scaffold. Sealing bars should be added to the lower end of the bottom door frame. Long sweeping rods should be set on the inside and outside of the door frame. The horizontal reinforcement rod shall be fastened with a fastener and a mast post.
The above are the specifications and instructions on the use of mobile scaffolding shared by the editors of Yanxin Senyu. I hope it will be helpful to you.
