Cold drawn flat steel is a commonly used profile. Its dimensions are the length, width, height, straightness, half length, inner diameter, diameter and thickness of the steel. Today's price of flat steel is a common concern for everyone. According to Xiaobian, the price of flat steel today is about 3800-3900 yuan/ton.
Where the specification of the cold drawn flat steel is within the reference range and does not require a fixed specification, it is called the uncertainty rule. It can also be called the normal size. The metal composite material supplied according to the uncertainty ruler is only required in the required size range. The supply is within the line. The cold-drawn flat steel fixed length is called a fixed length according to the ordering requirements. When supplied in a fixed-size size, the metal composite material paid must have the size specified by the acquirer in the order contract.
The cold drawn flat steel is cut into a multiple magnification according to the fixed specifications required by the order. When the double-size is supplied, the size of the metal composite paid must be the integer amount of the specific size of the purchaser in the order contract. Magnification. For example, the demand side requires a single size of 2m in the order contract. Then, when cutting into double gold coin calipers, the size is 4m, when cutting into 3 times, it is 6m, and each adds one or two sawing amounts. When the double ruler is supplied, only a positive deviation is allowed, and a negative bias value is not allowed.
These are some of the factors that affect the price of cold drawn flat steel today. In addition, the short and narrow gauges are also specific specifications of the specifications of the cold drawn flat steel. The so-called short ruler refers to the upper limit of the size of the undefined ruler whose size is less than the reference, but not less than the allowable shorter size. For example, water and liquefied gas conveyor steel pipe standards require that each batch has 10% of 2-4m long short-strip seamless steel pipe; 4m is the upper limit of the uncertainty rule size, the shorter the allowable size is 2m.
The narrow gauge of the cold drawn flat steel refers to the upper limit of the total width of the undefined ruler whose total width is less than the reference, but not less than the allowable narrow total width. When the product is supplied in a narrow gauge, attention must be paid to the narrow gauge ratio and the narrow gauge of the reference. Never exceed the relative range.
What is the price of cold drawn flat steel today? In fact, there are many influencing factors. The quantity, specifications, time, and manufacturer of the purchase will cause different prices. Therefore, before you buy, you need to consult the manufacturer's specific price. Don't blindly place an order!
