I-beam manufacturers remind everyone that I-beam is actually one of the common steels, and it will be treated with anti-rust during the processing and production process, but what? If we put them too long or don't pay much attention when using or storing them, it will cause rust. So how should we prevent it? Please watch the following.
Since we are often exposed to air before using I-beam, but for a long time, the I-beam will undergo a series of chemical reactions with oxygen and water in the air, causing rust. Moreover, rust not only affects the use of I-beam, but also delays the construction speed. In serious cases, it may cause collapse accidents. Therefore, it is recommended to derust and use it before using the I-beam. In order to better prevent rust, we should try not to expose it to the air during storage. Try to place it in a dry place as follows:
1. Before placing the I-beam into the warehouse, be sure to take precautions against rain and impurities. However, the need to be exposed to rain is to be wiped clean by different methods depending on the nature of the I-beam. For example, if the hardness is high, a wire brush can be used, and if the hardness is low, it can be wiped with cotton or cloth.
2. The storage site or warehouse is recommended to be drained, clean, and away from factories and mines that generate harmful gases or dust. If the weeds and sundries must be removed on the site, the steel should be clean.
3. Do not place the aggressive materials such as salt, alkali, acid and cement in the warehouse where the I-beam is placed. The I-beam should be stacked according to different specifications. Do not place them together and place them in contact. Corrosion and confusion.
The above is the full content of the maintenance method for the I-beam provided by the I-beam manufacturer. If you need to know more, please pay attention to the post-post information release to learn more!
