Galvanized angle steel is also known as hot dip galvanized angle steel or hot dip galvanized angle steel. There are many applications for galvanized angle steel. Generally speaking, galvanized angle steel is used to immerse the rust-removed angle steel in the left and right melted zinc liquid, so that the surface of the angle steel adheres to the zinc layer, thereby preserving the purpose, and is suitable for various strong acids and alkalis. In a highly corrosive environment such as fog.
Yanxin Sen Yu galvanized angle steel is widely used and has many advantages:
1. Low processing cost: the cost of galvanizing and rust prevention is lower than that of other paint coatings;
2, save time and effort: galvanizing process is faster and more time-saving than other coating construction methods, and can avoid the time required to paint on the construction site after installation;
3, the toughness of the coating: the galvanized layer forms a special metallurgical structure that can withstand mechanical damage during transportation and use;
4. Good reliability: the galvanized layer and the steel are metallurgically combined and become a part of the steel surface, so the durability of the coating is relatively reliable;
5, comprehensive protection: each part of the plated parts can be plated with zinc, even in the depressions, sharp corners and hidden places can be fully protected;
6. Durable: galvanized angle steel has surface gloss, uniform zinc layer, no leakage plating, no dripping, strong corrosion resistance. In urban or offshore areas, the standard hot-dip galvanized anti-rust layer can be kept for 20 years. There is no need to repair; in the suburban environment, the standard hot-dip galvanizing rust thickness can be maintained for 50-60 years without having to repair.
The surface quality of galvanized angle steel is specified in the standard. Generally, there must be no harmful defects such as delamination, crusting, cracks, etc.
The allowable range of angle geometry deviation is also specified in the standard, generally including bending, edge width, edge thickness, apex angle, theoretical weight, etc., and specifies that the angle steel must not have significant torsion.
The above is the full content of the use and advantages of galvanized angle steel introduced by Yanxin Senyu . Yanxin Senyu has been focusing on the steel industry for many years. If you have any needs, please call our hotline at 1593095 1570!
