Have you ever encountered a problem when you want to buy an I-beam, except for the price of the I-beam, I don’t know what to ask, and I found that my mind is blank. I didn’t know anything about this product.
So now, let's talk about some common parameters about I-beam by the Xiaobian of Yanxin Sen domain.
Hot-rolled ordinary I-beam is a long strip of steel with a cross-section of I-shaped. The cross-sectional dimension is expressed by the number of millimeters of waist height (h) × waist thickness (d). For example, the I-beam with a waist height of 160 mm, a leg width of 88 mm, and a waist thickness of 6 mm is marked as “160×88×6”. Another marking method for I-beam is expressed by model number, which is expressed in centimeters of waist height, such as Gong 16#. The I-beams with the same waist height but different waist thickness and leg width need to be distinguished by adding a, b, and c to the right of the model, such as 32a#, 32b#, 32c#, etc.
The price of I-beam is of course a problem that we must pay attention to when purchasing, but it is not the only concern. In addition to the price, the specifications, performance, and quality of the I-beam should be some of the issues we consider comprehensively. The following small series will then introduce you to some other parameters about I-beam.
The main use of I-beam: ordinary I-beam is widely used in various building structures, bridges, vehicles, brackets and machinery.
Hot-rolled light I-beam: Compared with ordinary I-beam, when the waist height is the same, the legs are wider, and the waist and legs are thinner, that is, the wide legs are thin. Under the condition of ensuring bearing capacity, light I-beam has better stability than ordinary I-beam and saves metal, so it has good economic effect.
Main use: Like ordinary I-beam, it is mainly used for large structural parts such as workshops and bridges, as well as vehicle and ship manufacturing.
The specification of the I-beam can be expressed by the main profile size (mm) of the section, that is, the number of millimeters of the waist height (h) * leg width (b) * waist thickness (d), such as 1160 * 88 * 6. The I-beam specification can also be expressed by the model number (number), and the model number indicates the number of centimeters in the waist height. If the waist height is the same as the I-beam, if there are several kinds of low leg width and waist thickness, it needs to be marked with the code (also called the corner code) a or b or c on the right side of the model.
Regarding the price of I-beam, the price quoted by Xiaobian today is about 3,700 yuan / ton. In fact, the above are some basic parameters and some uses of I-beam. Hebei Yanxin Senyu Trading Co., Ltd. is a conscience manufacturer integrating the production and sales of I-beams. I would like to know more about I-beam. , can pay attention to our website.
