At present, the market price of Malleable fasteners changes frequently. How much is Ma Steel's fasteners? Today, YanXin Metal will take you to know how much the malleable fasteners are and about the Maanshan Steel Fasteners.
Malleable fasteners, as the name implies, are made of Ma Steel. Ma Steel fasteners are also divided into three types: docking Ma Steel Fasteners, Rotary Ma Steel Fasteners, and Right Angle Ma Steel Fasteners.
Malleable
So how much is the Malleable fastener? In terms of price, the price of the three types of Majiao right angle, butt joint and rotation is different. Today, the national standard Ma Steel right angle fastener is about 6.6 yuan / piece, the national standard Ma Steel rotating fastener is about 7.1 yuan / piece, the national standard Ma Steel docking The fasteners are about 7.1 yuan / piece.
Introduce the amount of Malleable fasteners, YanXin Metal also want to introduce to you the correct use of Malleable fasteners:
1. The construction plan of the fastener-type steel pipe formwork bracket must be prepared before construction, and a more strict and careful construction plan should be formulated. If the plan is not well developed, some unpredictable events may occur during construction.
2, the appearance quality requirements of fasteners. Frequently, the appearance quality of the fasteners is tested. If there are cracks, deformations, or fasteners with bolts appearing on the bolts, it is strictly forbidden to use them; in case of failure to use these unqualified fasteners, construction failures and accidents may occur.
3. Steel pipes and fasteners used for fastener-type formwork brackets shall be sampled and tested before use. The quality and appearance of steel pipes and fasteners shall be sampled and tested to meet the standards. The number of random inspections shall be carried out in accordance with relevant regulations and shall be carried out according to a certain proportion. Sampling inspection, untested or unqualified testing shall not be used.
4. Regarding the bearing capacity of the fastener, the construction load on the working layer should meet the design requirements, must not be overloaded, and must bear a certain weight. The scaffolding must not be connected with the template bracket. When connecting, it must be treated to ensure the reasonable bearing of the fastener. weight.
