How does the tray buckle type scaffold build, how does the tray buckle type scaffold build ability guarantee the safety of the project?
Tray type scaffolding manufacturers teach you how to tray type scaffolding.
How to build the tray scaffold?
Aim the cross bar joint at the position of chrysanthemum disc, then insert the bolt into the hole of chrysanthemum disc with the hand and Pierce out the bottom of the joint, and then hit the top of the bolt with the hammer, so that the circular arc on the cross bar joint is closely combined with the vertical rod.
The height of the tray scaffold shall not be greater than 24m. If the height is greater than 24m, the design shall be calculated separately.
The step distance of adjacent horizontal bar should be 2m, the longitudinal distance of vertical bar should be 1.5m or 1.8m, and should not be larger than 2.1m. The vertical bar should be 0.9m or 1.2m.
The bottom of the vertical bar should be equipped with adjustable base, the first layer of vertical bar should adopt different length of vertical bar staggered arrangement.
A vertical inclined bar shall be set up along the outside of the frame body for every 5 spans and every layer, or a steel pipe scissors brace shall be set up between every 5 spans, and a vertical inclined bar shall be set up for the transverse layer of the end span.
The above is small make up for you to bring about the knowledge of how to build the tray type scaffolding, hope to help you build the tray type scaffolding.
