Disc type scaffold consists of vertical bar, cross bar, base, socket, steel pipe, disc and so on.
Disc scaffold is a multi-functional scaffold, is an upgrade products.
Disc scaffold socket for the diameter of 133mm, 10mm thick disc, the disc opened 8 holes, using 48*3.5mm, Q345B steel pipe as the main component, pole is in a certain length of steel pipe every 0.60m welding on a disc, with this novel, beautiful disc connection cross bar, bottom belt connection sleeve.
The crossbar is made of a plug with a bolt welded on both ends of the steel tube.
Disc scaffold accessories simple and convenient, parts can play a certain security.
The characteristics of assembled disc scaffold: good comprehensive benefits, safe and reliable, large bearing capacity, the product has a high degree of economy, more convenient to use, more efficient, less structure, multi-function.
The following points should be noted during installation of disc scaffold:
1. Before installation, check whether it is in good condition and prepare the accessories to be installed.
2. After the disc scaffold accessories are all ready, when installation, only need to aim the cross bar joint at the position of chrysanthemum disc, and then insert the bolt into the hole of chrysanthemum disc by hand and go through the bottom of the joint.
3. Next, use a hammer to hit the top of the bolt so that the circular arc on the cross bar joint is closely combined with the vertical bar.
4. Finally, when installing the base, use shake disc scaffold to check whether it is firm.
